Follow Focus Gear (98-110-8mm) for LOMO lenses in OCT-19 mount

This geared ring is purposed to be installed over the original focusing ring of LOMO lenses with OCT-19 mount in Konvas housing.

Most of such lenses have 98mm diameter of the focus ring - please check your lens to make sure before purchase.

Installation is simple - just put the gear over the original ring and secure three set screws with the included hex key.

The gear has a stop rim that automatically aligns.

If you don't need the gear anymore, removing is simple as well - loose three set screws and pull the gear off the lens.

Installation/removing takes about one minute, and doesn't require any special skills.

Dimensions:

• Inner diameter - 98 mm;
• Outer diameter -110 mm;
• Thickness - 8 mm;
• Mod - 0.8 mm (pitch 32);
• Weight - 40 g.