Cookie
This website requires cookies to provide all of its features. For more information on what data is contained in the cookies, please see our Privacy Policy page. To accept cookies from this site, please click the Accept button below.
It is special high-speed camera intended to work in hostile environment (corrosive medium, low temperature etc.)
It is special high-speed camera intended to work in hostile environment (corrosive medium, low temperature etc.)
Here are some some specifications from manual:
| Film type | 35mm |
| Frame size, mm | ? |
| Film movement | Direct only, in one plane |
| Number of films in the film channel | 1 |
| Shooting speed, fps | 24, 48, 96, 144, 192, 216-240 |
| Speed deviation, % | +/-2.5 |
| Image deviation, mm, no more at 24-96fps at 144-240fps |
0.02 0.04 |
| Starting time, sec, no more | 3 |
| Available lenses, F, mm | 18, 28, 40, 75, 150, 300 |
| Flange focal length? | 57+0.01 |
| Mag capacity, m | 60, 120 |
| Shutter | Disc-shaped, single-blade, variable angle (30, 60, 90, 120, 145 degrees) |
| Drive | DC motor MU-332A with tacho-generator and separate control unit |
| Power source | DC 27V+/-2.7V with no more than 3% pulses allowed |
| Consumption current without heater, A, no more | 32 |
| Consumption current of the heater, A, no more | 24 |
| Control tools | Footage counter, voltmeters, ammeters |
| Allowable temperatures, centigrade | +5 (-40 in box) to +35 |
| Atmosphere pressure, kPa (mm of mercury) | 613-1066 (460-800) |
| Ability to work (except power source, control unit, and remote control) after: | |
| 1. Vibration overload, Hz | 10 to 200 with acceleration 50 m/sec2 (5G). |
| 2. Continuous linear acceleration with overloads, m/sec2 (G) | 40 (4) |
| 3. Multiple impact loads with overloads, m/sec2 (G) | 40 (4), impact time is 0.01sec |
| Dimensions (with 120m mag and 150mm lens), mm | 620x180x190 |
| Weight with 60m mag and 150mm lens, without box, kg | 17 |
| Box weight | 7 |
| Other units total weight | about 23.5 |
| Manufacturer | LOMO |
|---|